Lenze 8400 HighLine C Series - Page 875

Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 875
8400 HighLine | Parameter setting & configuration
Function library
Function blocks
Related topics:
Overview of system blocks available
( 1070)
Working with the FB Editor
( 820)
L_SignalSwitch_1
L_SignalSwitch_2
L_SignalSwitch_3
L_SignalSwitch_4
2 μs ... switches between two input signals of the "WORD" data type.
• This FB is only available from version 04.00.00.
L_SQrt_1
3 μs ... outputs the square root for a DINT input value.
L_SRFG_1
L_SRFG_2
2 μs ... is a ramp function generator with S-shaped ramps for limiting the
temporal rise of analog signals.
• This FB is only available from version 04.00.00.
L_Transient_1
L_Transient_2
L_Transient_3
L_Transient_4
L_Transient_5
L_Transient_6
L_Transient_7
L_Transient_8
3 μs ... evaluates digital signal edges and converts them into timed pulses.
• The L_Transient_5-8 function blocks are only available from version
04.00.00.
Function block Runtime Function
efesotomasyon.com - Lenze