Lenze 9300 Servo PLC - 2.10 Digital frequency output (DF_OUT_DigitalFrequency)

9300 Servo PLC
System blocks
2.10 Digital frequency output (DF_OUT_DigitalFrequency)
2-38

9300ServoPLC EN 1.4
2.10 Digital frequency output (DF_OUT_DigitalFrequency)
Module number: 22
Converts internal speed signals into frequency signals and outputs them, for example, to following
drives. The transmission is very precise (without offset and gain errors).
C 0030
C 0540
CTRL
D FO U T_nO ut_v
C 0547
C 0549
D FO U T_nIn_v
DF_OUT
C 0545
1
0
2
4
5
X8
X9
X10
C 0540
1
0
2
4
5
C 0540
n
max
Abb. 2-23 Digital frequency output (DF_OUT)
VariableName
DataType SignalType Address DIS DIS format Note
DFOUT_nOut_v Integer velocity %QW22.0 C0547
C0549
dec [%]
dec [rpm]
DFOUT_nIn_v Integer velocity %IW22.0 - -
Range of functions
• Output signals on X10
• Output of an analog signal
• Output of a speed signal
• Encoder simulation of the resolver with zero track in resolver zero position
• Direct output of X8
• Direct output of X9
• Technical data for the connection of X9 and X10
Note!
The DF_OUT system block operates with residual values.
Show/Hide Bookmarks