Lenze 9300 Servo PLC - 2.10.5 Direct output of X8; 2.10.6 Direct output of X9

9300 Servo PLC
System blocks
2.10 Digital frequency output (DF_OUT_DigitalFrequency)
2-41

9300ServoPLC EN 1.4
2.10.5 Direct output of X8
Selection: C0540 = 5
Use: X8 as input for incremental encoder or Sin-Cos encoder
• The signal at input X8 is amplified electrically and is output directly to X10.
• The signals depend on the assignment of input X8.
• C0030 and C0545 have no function.
• The zero track is output only if it is connected to X8.
2.10.6 Direct output of X9
Selection: C0540 = 4
Use: X9 as digital frequency input
• The signal at input X9 is amplified electrically and is output directly to X10.
• The signals depend on the assignment of input X9.
• C0030 and C0545 have no function.
• The zero track is output only if it is connected to X9.
Show/Hide Bookmarks