Lenze 9300 Servo PLC - 2.12 Free Codes (FCODE_FreeCodes)

9300 Servo PLC
System blocks
2.12 Free Codes (FCODE_FreeCodes)
2-45

9300ServoPLC EN 1.4
2.12 Free Codes (FCODE_FreeCodes)
Module number: 141
This SB can be used to assign code values directly to variables. The code value that is entered is
converted into the corresponding variable value by a fixed scaling routine.
FCODE_nC17_a
FCODE
rpm TO INT
C0017
FCODE_nC26_1_a
% TO INT C0026/1
FCODE_nC26_2_a
% TO INT
C0026/2
FCODE_nC27_1_a
% TO INT C0027/1
FCODE_nC27_2_a
% TO INT
C0027/2
FCODE_nC32_a
INT
C0032
FCODE_nC37_a
rpm TO INT
C0037
FCODE_nC141_a
% TO INT
C0141
FCODE_nC108_1_a
% TO INT
C0108/1
FCODE_nC108_2_a
% TO INT
C0108/2
FCODE_nC109_1_a
% TO INT
C0109/1
FCODE_nC109_2_a
% TO INT
C0109/2
FCODE_bC250_b
BOOL
C0250
C0471
FCODE_bC471Bit0_b
FCODE_bC471Bit1_b
FCODE_bC471Bit1_b
.
.
.
DWORD
TO
BIT/BOOL
FCODE_nC472_1_a
% TO INT
C0472/1
.
.
.
FCODE_nC472_20_a
% TO INT
C0472/20
FCODE_nC473_1_a
INT
C0473/1
.
.
.
FCODE_nC473_10_a
C0473/10
INT
FCODE_dnC474_1_p
DINT
C0474/1
.
.
.
FCODE_dnC474_5_p
C0474/5
DINT
FCODE_nC475_1_v
C0475/1
FCODE_nC475_2_v
C0475/2
INT
INT
C0135
FCODE_bC135Bit0_b
FCODE_bC135Bit15_b
.
.
.
16 Bit
FCODE_nC141_a
% TO INT
C0141
Abb. 2-27 Freecodes (FCODE)
Show/Hide Bookmarks