Lexus NX450h+ - How to Receive Calls; Answering Calls

How to receive calls
Answering calls
When a call is received, a ringtone sounds and the incoming call screen or incom-
ing call notification is displayed. When the voice control system setting [Voice
support] is on, the voice control system will start when a call is received.
●
Answer the call by doing one of the
following.
● Touch [
].
● Press the [ ] switch on the steering
switch.
● Speak a voice command to answer the
phone with the voice control system.
INFORMATION
● The incoming call screen is not displayed while the peripheral monitoring screen is
being displayed. Incoming call notification is provided by ringtone only.
● During an incoming call, all sounds other than those coming from the hands-free
call are muted. However, voice guidance with a higher priority than the hands-free
call is not muted.
● Even if the cellular phone ringtone is set on the multimedia system, the multimedia
system may output a different ringtone depending on the cellular phone settings.
● Depending on the cellular phone settings such as drive mode, you may not be able
to receive calls.
● Depending on the cellular phone model, the following may occur.
•
The ringtone may be heard from both the vehicle speakers and the cellular
phone.
•
When receiving a call, the caller's phone number may not be displayed.
•
If a call was received by operating the cellular phone directly, or if the cellular
phone has been set to automatically answer calls, the call may stay on the cellular
phone.
•
If there was an incoming call while the cellular phone is transmitting data, the
incoming call screen may not be displayed on the multimedia system and the
ringtone may not sound.
● If the cellular phone supports automatic contact data transfer (PBAP), the image
data in contacts has been transferred, and [Display contact images] is set to on,
the contact's image will be shown alongside their phone number when a call is
received.
6-4. How to receive calls
234