Display mode when the shift position is in "D" or "N"
You can check for nearby pedestrians, bicycles, and vehicles at intersections with
poor visibility and T-junctions by displaying vision of your surroundings on the
screen. This mode also provides support to check both sides of the vehicle for
safety, avoid collisions on narrow roads, and pulling over to the side of the road.
1. Shift the shift position to "D" or "N".
2. Press the camera switch.
● The mode changes every time you press the camera switch.
●
If the cornering view mode is on and you turn the steering wheel more than
180 degrees from the straight position, the display will change from side
clearance view & panoramic view to cornering view & panoramic view.
■ Wide front view & panoramic view
A
Front distance guide lines
Displays about 1 m (3 ft.) in front of the vehicle.
B
Forward estimated course lines
Displays course lines that are linked to operation of the steering wheel. (Yellow)
These lines are displayed when the steering wheel is turned more than 90 degrees
from the straight position.
C
Lexus parking assist-sensor
Displays an indicator on the screen and sounds a buzzer when an object is detected
by a sensor. (For details about the Lexus parking assist-sensor, see the "OWNER’S
MANUAL".)
D
FCTA (Front Cross Traffic Alert)/Moving objects alert
*1
8-2. Panoramic view monitor
293
8
Parking assist system
To Next Page
Loading...
