Changing the orientation of the map
The orientation of the map can be fixed or changed to match the vehicle heading.
Change the orientation as desired.
Each time [ ] on the map screen is touched, the orientation of the map screen
will change between north up, heading up, and 3D display.
● North up display [ ]
The map is always displayed with north up, regardless of the direction travel of
the vehicle.
● Heading up display [ ]
The map is always displayed with the direction of travel of the vehicle always up.
● 3D map [ ]
Displays a 3D map. When 3D map is touched, the map is displayed with the
direction of travel of the vehicle always up.
INFORMATION
● The display angle of the 3D map can be adjusted.
● When the orientation of the map is heading up or 3D map, if the map is changed to
any screen other than the current position screen (destination setting map screen, full
route map screen, etc.), the orientation will change to north up. However, it will return
to heading up or 3D map when the current position screen is displayed.
Related Links
Display angle setting(P. 81)
1-2. Basic operation of navigation system
32
To Next Page
Loading...
