position, the side clearance view will be automatically changed to the cornering
view.
● The cornering view will be displayed until the steering wheel will be operated
within approximately 90 degrees from the center (straightline) position.
INFORMATION
● You can change cornering view auto mode in the custom settings.
● The cornering view will not be displayed when the vehicle speed is approximately 12
km/h (7 mph) or more.
Related Links
Changing the panoramic view monitor settings(P. 318)
Lexus parking assist-sensor linked display
Depending on the Lexus parking assist-sensor detection state, wide front view &
panoramic view/Side clearance view/Cornering view & panoramic view will be
displayed.
● The views are displayed automatically when the Lexus parking assist-sensor
detects an obstacle (when the shift position is in "D" or "N").
● The display returns to the previous screen automatically when the Lexus parking
assist-sensor stops detecting an obstacle.
INFORMATION
● Press the camera switch while the screen is displayed to return to the original screen.
● If the panoramic view monitor screen is canceled when an obstacle is detected, the
panoramic view monitor screen can be displayed again by touching the Lexus parking
assist-sensor mark shown on the multimedia system screen.
8-2. Panoramic view monitor
299
8
Parking assist system
To Next Page
Loading...
