■ Touch the microphone button
Touch [ ] on the screen.
INFORMATION
● Voice operations can be done from the driver seat or passenger seat by activating the
voice control system with wake word. On this occasion, voice commands from seats
other than the system activating seat are not recognized.
● However, some features are not available for voice control from passenger seat.
● If the voice control system was activated by the talk switch or microphone button,
voice operations can be performed only from the drivers seat.
● The voice control system may not recognize commands if they are not said clearly.
Take note of the following points when using it:
• Speak in a clear voice.
•
Close the window as commands may not be recognized properly due to noise
(wind noise or external noise).
•
If the air conditioner blows loudly, commands may not be recognized properly, so
reduce the fan speed.
•
If music is being played loudly while a command is issued, that command may not
be recognized, so lower the music volume.
•
Commands may not be recognized if several people speak at once.
● You can interrupt the voice prompt by saying a voice command.
● You can turn voice prompt on or off on the voice control settings screen.
● You can adjust the system voice volume on the sound and media settings screen.
Related Links
Changing the wake word to start the voice control system(P. 69)
Changing the voice control settings(P. 69)
Changing sound and media settings(P. 95)
*1 : This function is not available in some countries or areas.
1-4. Voice control system
43
1
Basic operation
To Next Page
Loading...
