LORCH MF-08 - Accessories; Options; Technical Data

Accessories
- 24 -
02.20909.2079.9-03
13 Technical data
Machine type MF-08
Welding
Welding range (12max) A/V 550
Welding current at ED 100 % 40°C A 400
Welding current at ED 60 % 40°C A 500
Weldable wires steel Ø mm 0.6...1.6
Weldable wires aluminium Ø mm 1.0...2.4
Weldable wires CrNi Ø mm 0.8...1.6
Weldable wires CuSi Ø mm 0.8...1.2
Wire feed rate m/min 2...25
Mains
Supply voltage U1 VDC 62
Current input I1 (max. current) A 3
Machine
Protection class (in accordance with EN
60529)
IP23S
Standard EN 60974-5
Dimensions and weights
Wire feeder dimensions (LxWxH) mm 575 x 245 x 434
Wire feeder dimensions without han-
dle (LxWxH)
mm 575 x 245 x 380
Feeder weight kg 10.6
Standard equipment
Feed unit Rollers 4
Tab. 2: Technical data
ED = Switch-on duration
14 Options
Digital Push Pull
 For digital control of Push Pull torches as well as for ma-
chines with additional intermediate drive.
Push Pull torch
 With torches having a length in excess of 5 m, we recom-
mend the use of a Push Pull torch. This has an additional
feed motor on the front of the torch, to ensure a continu-
ous feed.
Intermediate hose assemblies
 Extension between the power source and the wire feeder
of 1 – 20 m.
15 Accessories
Vertical mini trolley MF-08 (KG11)
Order number: 570.3060.0
Vertical trolley MF-08 (KG11)
Order number: 570.3062.0