LOYTEC L-DALI - Page 17

L-DALI User Manual 17 LOYTEC
Version 5.2 LOYTEC electronics GmbH
L-DALI supports common mathematical operations and functions, as well as Boolean
expressions.
Some lighting controller applications do not need a connection to the CEA-709 or BACnet
network. Therefore the L-DALI controller can control a DALI network as a standalone
device with the aid of the supported automation functions (alarming, scheduling, and
trending). Connected to an IP network, remote access allows to set parameters and to read
the system status.
The complete configuration can be done through the built-in Web server. The
commissioning and maintenance of the DALI system can be done using a standard Web
browser on a PC. The configuration can also be done via an PC based configuration
software (LONMARK/CEA-709 models only).
The L-DALI offers the following features:
 DALI gateway and controller
 Supports 1, 2, or 4 DALI channels (dependent on model)
 Direct control of up to 64 DALI devices per DALI channel
 Direct control of up to 16 DALI groups per DALI channel
 Scene control for up to 16 groups and one broadcast scene per DALI channel
 Detect lamp and ballast failure on DALI luminaries and signals
 Simple replacement of (broken) DALI devices (no configuration tool required)
 DALI Multi-Master capable
 Support for DALI sensors and buttons
 Built-in DALI protocol analyzer
 Supports Alarming, Scheduling, and Trending (AST™)
 Supports common mathematical operations and functions as well as Boolean
expressions
 Supports event-driven e-mail notification
 Supports periodic testing of emergency lights
 Supports lamp burn-in mode
 Support calculation of energy consumption and run-hours
 OPC XML/DA (LWEB integration)
 Configuration via Web interface
 Firmware update via serial, CEA-709, or Ethernet port
 Operating Voltage: 12-35 V DC or 12-24 V AC
 157 x 86 x 60 (L x B x H in mm) or 9 TE