Chapter 12. Troubleshooting
236 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
000A Drive error detected
000B Rebuild started
000C Initialize started
000E Initialize failed
000F SMART threshold exceeded
0019 Drive removed
001A Drive inserted
001E Unit inoperable
001F Unit Operational
0021 Downgrade UDMA mode
0022 Upgrade UDMA mode
0023 Sector repair completed
0024 Buffer integrity test failed
0025 Cache flush failed; some data lost
0026 Drive ECC error reported
0027 DCB checksum error detected
0028 DCB version unsupported
0029 Verify started
002A Verify failed
002B Verify completed
002C Source drive ECC error overwritten
002D Source drive error occurred
002E Replacement drive capacity too small
002F Verify not started; unit never initialized
0030 Drive not supported
0032 Spare capacity too small
0033 Migration started
0034 Migration failed
0035 Migration completed
0036 Verify fixed data/parity mismatch
Table 14: Error and Notification Message List
Value Message
To Next Page
Loading...
Need help?
General
