LulzBot Mini - Multiple Extruder Options - Print Settings Tab; Multiple Extruder Options - Tool Change G-Code

2.5. EXPERT MODE
Figure 2.46: Multiple extruder options - Print Settings Tab.
Configuring Tool Changes
The Custom G-code subsection of the Printer Settings tab has an option
for inserting G-code between tool changes. As with all custom G-code
subsections, placeholder variables can be used to reference Slic3r settings.
This includes the [previous_extruder] and [next_extruder] variables.
Figure 2.47: Multiple extruder options - Tool change G-code.
101