LulzBot Mini User Manual

1.20. BRIM
Only Follow Mesh Surface
This will cause your print to follow the outside of your model, building
it completely hollow with a single wall outer shell. The only difference
between this and Spiralize, is that the Z axis moves regularly. That is, it
prints a layer and then moves up to the next one.
1.20 Brim
Brim circles the base of the print while making contact, helping adhere
the print to the heated plate. This is only one layer thick, and easily
removed post-print. This section defines how the brim is formed when
brim is activated in basic settings.
Brim Line Amount
This will determine the distance the brim will cover around the outside of
your object. The more brim used, the better your part will adhere to the
plate.
1.21 Raft
Raft is a platform built underneath your object, designed to help adhesion
and prevent warping. It will lay down support material, and then a
platform on top of the supports. Your model will be built on top of this
platform. The bottom surface of your printed part will not be as clean or
as even when using this option. Raft is typically not recommended.
Extra Margin
This determines the distance around the outside of your object that the
raft is created. Can be helpful for ensuring no warping of the lower layers.
39

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g