LulzBot Mini User Manual

2.5. EXPERT MODE
and bridges and gaps are available, as well as the ability to slow down for
the first layer.
Figure 2.21: Expert mode speed options.
Where indicated a value can be given in percentage. This is in relation
to the preceding value, e.g. 50% solid infill would be half of the value
defined for infill.
A few general guidelines for each option:
• Perimeters - In expert mode this parameter can be increased slightly
as the External perimeters option can be used to ensure blemish
free external faces.
81

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g