LulzBot Mini User Manual

Slic3r
Configuration Wizard
Slic3r has two features to aid newcomers: the configuration wizard, and
simple mode.
Sometimes it is nice to have a helping hand when starting out with new
software. The configuration wizard asks a series of questions and creates a
configuration for Slic3r to start with.
When using the pre-set Mini Slic3r profiles you do not need to complete
the Configuration Wizard. The Configuration Wizard can be later accessed
from the top menu once you are ready to start creating your own Slic3r
profiles.
Figure 2.1: Configuration Wizard: Welcome Screen
56

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g