LulzBot Mini User Manual

2.5. EXPERT MODE
Extrusion Width
Figure 2.48: Extrusion widths options.
One reason for modifying the extrusion width has already been discussed:
increasing first layer extrusion width in order to improve bed adhesion (see
p.65). There are some further cases where it may be beneficial to modify
extrusion widths.
• Perimeter - A lower value will produce thinner extrusions which in
turn will produce more accurate surfaces.
• Infill and Solid Infill - A thicker extrusion for infill will produce
faster prints and stronger parts.
• Top infill - A thinner extrusion will improve surface finish and
ensure corners are tightly filled.
• Support material - As with the infill options, a thicker extrusion
will speed up print time.
103

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g