LulzBot Mini User Manual

1.22. FIX HORRIBLE
1.22 Fix Horrible
These are some of the more advanced and experimental options. They are
designed to help repair models with errors to make them suitable for 3D
printing. They do not always work. Please be cautious when using these
options as they can have unintended effects on your print quality.
Combine Everything (Type-A)
This will attempt to fix all external mesh errors, while keeping internal
holes intact. This can accidentaly fill in intentional internal holes.
Combine Everything (Type-B)
This will ignore all internal holes of the model and only focus on the external
holes. This is helpful when only the outside finish of the model is important.
Keep Open Faces
This will ignore all manifold errors in the object. It can create issues
generating the Gcode as Cura does not know how to interpret the open
holes. This option should only be used if you are sure that the holes in the
mesh are intended. In general, you should not use this option.
Extensive Stiching
This causes Cura to automatically add triangle meshes in an attempt to
fix manifold errors. This algorithm will greatly increase Gcode generation
time and may end up adding in un-intended meshes. It is recommended
that you repair your model through Meshlab or your CAD program before
attempting this option.
41

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g