LulzBot Mini User Manual

3D Printer Software
• Download the appropriate installer for your computer operating
system.
• Install Cura by double clicking on the installer.
• Select Lulzbot Mini.
• Once the proper printer is selected, select Next.
Once the installation wizard finishes you can move forward with your
first print!
1.5 Quick Print Settings
Figure 1.1: Quick Print Settings
After setting up Cura for the first time, you will be shown the main interface
screen. (Fig. 1.1, page 16):
16

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g