LulzBot Mini User Manual

1.5. QUICK PRINT SETTINGS
Selecting a Quick Print Profile
The print quality settings can be found in the top left-hand corner of the
window. For most filaments, there will be High Quality, Normal Quality,
or Fast Quality options. Some of the more exotic filaments may only have
a Normal Quality profile.
High Quality
Designed to give greater detail and finer objects. This will have a
smaller layer height, which will make each layer thinner, so that curves
seem more natural and walls seem less noticable. This setting will
also require more layers to be laid down, increasing overall print time.
Medium Quality
Designed to give a medium resolution, by increasing the layer height
and print speeds. This will make the organic curves slightly more
step-like than the fine setting, but will reduce printing time.
Fast Quality
Designed for the fast prints, where overall model finish is not of
concern. Most commonly used for quick iteration of designs found
in rapid prototyping.
Material Selection
Choose your desired filament. The Lulzbot Mini ships with a 1 meter
sample of HIPS, that should be used in your first print.
Printing Support Material
The Mini 3D printer is able to print models that have angles and overhangs,
even without support material depending on the overhang distance and
angle. Turn this option on if your model could benefit from support
material.
Brim
Brim is used to increase surface area of the part your printing, thereby
ensuring proper part adhesion. This will print a single layer high edge
17

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g