3D Printer Software
1.7 Starting Your First Print
Once you have your model, profile, and filament loaded, it is time for your
first print!
Control
Connect your 3D printer to a computer using a USB cable, power it on
and select the Control button. This will bring up your Pronterface user
interface. You will not be able to send any commands until the window
title changes to Operational. As soon as it is operational, select Print.
This will start the printing process: (set the appropriate temperatures, go
through the auto-leveling procedure, and start printing your model).
Figure 1.11: Control Screen
1.8 Removing Your First Print
After your first print has finished, you need to wait for the part to cool
down. Your parts will be easier to remove if you allow your heated bed to
cool down to optimal temperature. This will allow the plastic to contract,
24
To Next Page
Loading...
