LulzBot Mini User Manual

Slic3r
2.10 Slic3r Support
Slic3r Support
A variety of resources are available to provide support for Slic3r.
Wiki and FAQ
The wiki provides up-to-date documentation, and a FAQ sub-
section which may help resolve any queries or issues.
• https://github.com/alexrj/Slic3r/wiki/Documentation
• https://github.com/alexrj/Slic3r/wiki/FAQ
Blog
The Slic3r blog contains tips, hints, and advice.
• http://slic3r.org/blog
IRC
Found on the irc.freenode.net server, the following chat
rooms are often filled with people who can provide real-time
help:
• #reprap: Highly active community of the RepRap project
with many users of Slic3r.
• #slic3r: Slic3r chat room where Slic3r developers and
users can provide help.
RepRap.org Forum
The RepRap forums contain a dedicated forum for Slic3r.
• forums.reprap.org/list.php?263
122

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g