LulzBot Mini User Manual

Advanced Usage
Before printing with 1.75mm filament, make sure to make the needed
changes in your slicing software (in Slic3r it can be found at Filament
Settings > Filament > Diameter; in Cura the setting can be found
under the Quick Settings screen or under the Basic tab) for 1.75mm
filament. You will need to re-slice any previously sliced files with the new
settings for 1.75mm filament.
132

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g