LulzBot Mini - Page 142

INDEX
Post-processing scripts, 119
Perimeters, 73
Sequential printing
Extruder clearance, 112
Skirt and brim
Skirt, 91
Solid layers, 73
Speed, 75, 81
Acceleration control, 82
Bridges, 81
External perimeters, 81
First layer speed, 81
Gap fill, 81
Infill, 75, 81
Perimeters, 75, 81
Small perimeters, 81
Solid infill, 81
Support material, 81
Top solid , 81
Travel, 75, 81
Support material, 75
Enforce support, 95
Generate support material,
75, 95
Overhang threshold, 95
Pattern, 96
Pattern Angle, 97
Pattern Spacing, 97
Pattern spacing, 75
Raft layers, 75
Print Speed, 27
printed parts, 134
Printer Host, 14
Printer Settings, 77
Custom G-code
End G-code, 79
Start G-code, 79
Tool change G-code, 101
Extruder
Extruder offset, 99
Nozzle diameter, 59, 79
Firmware
G-code flavour, 57, 79
Size and coordinates, 78
Bed size, 58, 78
Print center, 78
Z offset, 78
Printing, 71
Printing Temperature, 27
Printrun, 41, 44, 45, 134
profiles, 109
create, 109
delete, 110
pronsole, 41
pronterface, 41
Q
Quick Print Profile, 17
Quick Print Settings, 16
R
Raft, 29, 39
RAMBo, 128, 134
Removing a Print, 24
RepRap, 122, 136
Resolution, 17
Retraction, 27, 35
retraction, 89
Retraction Distance, 30
Retraction Speed, 30
S
scripting, 114
scripts, 119
SD card, 41
Sequential Printing, 112
Shapesmith, 49
142