LulzBot TAZ 5 - Page 166

INDEX
P
Paths, 129
Pause, 25
Pause at Z Height, 35
PEI, 150
PEI surface, 146
Plater, 73, 106
plater, 47
Plugins, 34
port, 51
post processing, 125
power supply, viii
Print Settings, 77
Brim, 82
Brim width, 82
Inll, 80
Fill angle, 94
Fill density, 80, 90
Fill pattern, 80, 90
Fill Top/bottom ll pattern,
90
Inll before perimeters, 94
Inll every n layers, 94
Only inll where needed, 94
Only retract when crossing
perimeters, 94, 96
Solid inll every n layers, 94
Solid inll threshold area,
94
Layer height, 78
Multiple Extruders, 106
Output options
Post-processing scripts, 125
Perimeters, 79
Sequential printing
Extruder clearance, 118
Skirt and brim
Skirt, 97
Solid layers, 79
Speed, 81, 88
Acceleration control, 89
Bridges, 88
External perimeters, 88
First layer speed, 88
Gap ll, 88
Inll, 81, 88
Perimeters, 81, 88
Small perimeters, 88
Solid inll, 88
Support material, 88
Top solid , 88
Travel, 81, 88
Support material, 81
Enforce support, 102
Generate support material,
81, 102
Overhang threshold, 102
Pattern, 102
Pattern Angle, 104
Pattern Spacing, 104
Pattern spacing, 81
Raft layers, 81
Print Speed, 29
printed parts, 154
Printer Host, 12
Printer Settings, 84
Custom G-code
End G-code, 85
Start G-code, 85
Tool change G-code, 107
Extruder
Extruder oset, 106
Nozzle diameter, 65, 85
Firmware
G-code avour, 63, 85
Size and coordinates, 84
166