LulzBot TAZ 5 - Quick Print Settings; High Detail

1.5. QUICK PRINT SETTINGS
1.5 Quick Print Settings
Figure 1.1: Quick Print Settings
After setting up Cura for the rst time, you will be shown the main interface
screen. (Fig. 1.1, page 15):
Selecting a Quick Print Profile
The print quality settings can be found in the top left-hand corner of the
window. For most laments, there will be Standard, High Speed, and High
Detail options. Some of the more exotic laments may only have a Standard
prole.
High Detail
Designed to give greater detail and ner objects. This will have a
smaller layer height, which will make each layer thinner, so that curves
seem more natural and walls seem less noticeable. This setting will
also require more layers to be laid down, increasing overall print time.
Standard
Designed to give a medium resolution by increasing the layer height
17