3D Printer Software
print look worse.
Surface Layers
This will determine the number of layers that create the “platform” of your
raft. If you have a wide line spacing, you may want to increase this number
to ensure a solid platform.
1.22 Fix Horrible
These are some of the more advanced and experimental options. They are
designed to help repair models with errors to make them suitable for 3D
printing. They do not always work. Please be cautious when using these
options as they can have unintended eects on your print quality.
Combine Everything (Type-A)
This will attempt to x all external mesh errors, while keeping internal
holes intact. This can accidentally ll in intentional internal holes.
Combine Everything (Type-B)
This will ignore all internal holes of the model and only focus on the external
holes. This is helpful when only the outside nish of the model is important.
Keep Open Faces
This will ignore all manifold errors in the object. It can create issues
generating the Gcode as Cura does not know how to interpret the open
holes. This option should only be used if you are sure that the holes in the
mesh are intended. In general, you should not use this option.
Extensive Stitching
This causes Cura to automatically add triangle meshes in an attempt to
x manifold errors. This algorithm will greatly increase Gcode generation
time and may end up adding in un-intended meshes. It is recommended
44
To Next Page
Loading...
