Slic3r
2. Bed Size
This setting denes the maximum distance the extruder may travel along
the X and Y axis. The dimensions for the TAZ print surface are X: 298
and Y: 275.
Be sure to measure from the lower left corner where the extruder nozzle
rests when are the home position to the maximum distance the nozzle can
travel in each direction. Take into account that the X carriage may touch
the frame before the nozzle reaches it’s full distance, this will depend on
the printer make and model.
Figure 2.3: Conguration Wizard: Bed Size
66
To Next Page
Loading...
