Slic3r
• Start Slic3r directly by running the Slic3r executable, found in the
bin directory, or
• Install Slic3r by running the do-install executable, also found in the
bin folder.
The archive le may then be deleted.
Windows
Unzip the downloaded zip le to a folder of your choosing, there is no
installer script. The resulting folder contains two executables:
• slic3r.exe - starts the GUI version.
• slic3r-console.exe - can be used from the command line.
The zip le may then be deleted.
Mac OS X
Double-click the downloaded dmg le, an instance of Finder should open
together with an icon of the Slic3r program. Navigate to the Applications
directory and drag and drop the Slic3r icon into it. The dmg le may then
be deleted.
Building from source
For those wishing to live on the cutting edge, Slic3r can
be compiled from the latest source les found on GitHub
https://github.com/alexrj/Slic3r.
Up-to-date instructions for compiling and running from source can be
found on the Slic3r wiki.
2.3 First Print
Calibration
Your LulzBot
™
TAZ 3D printer was calibrated at the factory prior to
packing. TAZ users do not need to calibrate their printers.
62
To Next Page
Loading...
