1.7. STARTING YOUR FIRST PRINT
Pausing Mid-Print
You will notice after you click the print button through Cura, it will
change to a pause button. When activated, it will pause your print and
automatically move your print head away from your object. This will allow
color changes or material changes mid print.
Recommended Temperatures and Bed Preperation
When preparing your printer for operation, please be sure to set your
temperatures, in Celsius, for the specic lament you are using. We have
found that for certain materials a glue stick is required for successful bed
adhesion and/or part release. Glue stick can also be added to help rst
layer adhesion on any material, and may be helpful for objects with a
larger surface area.
Filament Type Bed Preparation Nozzle Temp Bed Temp Removal Temp
ABS Clean PEI 240-260 110 50
PLA Clean PEI 195-215 60 45
HIPS Clean PEI 240-260 110 50
Laywoo-D3 Clean PEI 175-195 60 45
Laybrick Clean PEI 175-195 60 45
Magnetic Iron PLA Clean PEI 220-230 60 45
Stainless Steel PLA Clean PEI 220-230 60 45
Conductive PLA Clean PEI 215-230 60 50
nGen Clean PEI 225-250 75 60
Coee PLA Clean PEI 215-230 60 50
High Temp PLA Clean PEI 215-230 60 50
t-glase Glue stick 240-260 60 45
Flexible Filaments Glue stick 215-230 50 35
Nylons Glue stick 220-270 110 50
Polycarbonate Glue stick 260-300 110 50
Polycarbonate + ABS Glue stick 260-280 110 50
INOVA 1800 Glue stick 235-255 75 50
n-vent Glue stick 220-260 110 50
27
To Next Page
Loading...
