4-60
Application Manual CDA3000
4 Application data sets
The parameter presets for application data sets M-S_x are located as
parameter comparison references in section 4.6.5 “Comparison of para-
meters, Master/-Slave operation”.
Input signals
(1) Guide value from master
(2) DC braking torque
Figure 4.45 Example of a driving profile with Master/-Slave coupling
(ASTER = M-S_4)
The characteristic of the output signals is shown in section 4.6.3 “M-S_3”
in Figure 4.43.
t [ms]
0
f [Hz]
v [m/s]
0
1
STR
(2)
0
(1)
594-STPR1
To Next Page
Loading...
