Application Manual CDA3000
A-1
1
2
3
4
5
6
A
DE
EN
FR
Appendix A Overview of parameters
The following parameter overview contains all the parameters up to user
level 01-MODE = 4 in the factory setting (152-ASTER = DRV_1), in soft-
ware version V1.30-0.
Abbreviations:
Note: The DRIVEMANAGER has a user-friendly print function which
you can use at any time to print off your latest parameter list.
R Read level (LE), indicates the user level (01-MODE)
as from which the parameter is displayed
W Write level (SE), indicates the user level (01-MODE)
as from which the parameter can be edited
RAM C V RAM control variable
RAM A V RAM actual value
FIXPT Fixed point
FLASH Flash-EPROM, retained after power-off
G dependent on device
To Next Page
Loading...
