Lust CDA3000 - Characteristic Data Sets

3-6
Application Manual CDA3000
3 User interface and data structure
3.1.3 Characteristic
data sets
Each user data set and the application data sets may contain a second
characteristic data set. The switch can be made to this second character-
istic data set
• by terminals
• when a frequency limit is reached
• when the direction is reversed or
• by bus access.
Online switching between characteristic data sets CDS1 and CDS2 is
possible.
The following subject areas contain parameters for the second character-
istic data set:
 Reference structure:
Min., max. and fixed frequency
 Driving profile generator:
Ramps
 Current-controlled startup:
All parameters
 VoltageFrequencyControl:
All parameters
 IxR load compensation:
All parameters
 Slip compensation:
All parameters
 Current injection:
All parameters
 Magnetizing:
All parameters
 Speed controller SFC:
All parameters
 Speed controller FOR
All parameters
 Analog inputs
Scaling