Lust CDA3000 - Field Bus Operation

4-40
Application Manual CDA3000
4 Application data sets
4.5 Field bus
operation
By setting parameter 152-ASTER one of the application data sets BUS_1
to BUS_3 is loaded into the RAM (see Figure 4.1 in section 4.1 “Acti-
vating an application data set”). As a result the software functions and the
inputs and outputs for the “field bus operation” application are preset.
The precondition for field bus operation is that an appropriate communi-
cation module is mounted on the CDA3000.
(1) Field bus
(2) Inverter module
(3) IEC standard motor
(4) Gearing
(5) Application
Figure 4.27 Drive solution: “Field bus operation”
+
+
+
+
+
+
+
+
SPS
~
~
=
CPU
~
~
=
CPU
~
~
=
CPU
M
3~
n1
n2
M
3~
n1
n2
M
3~
n1
n2
(2)
(3)
(4)
(2)
(3)
(4)
(2)
(3)
(4)
Process
(5)
(1)