Application Manual CDA3000
DE
EN
FR
Revision history
The following pages are new to this revision:
The following pages have been amended/corrected:
Changes from version: 0840.02B.2-00 March 2000
to version: 0840.02B.3-00 October 2000
Section Page(s) Comments/Subject
6.1.5 Entirely new
Section Page(s) Comments/Subject
Cover inside Software version changed from V1.4 to V2.10
2.1 2-4 ISD00 changed to ISD01
2.4 2-9
2-10
Switching level Low/High: <5V/>15V DC changed to
<5V/ >18V DC
2-11 Notes added
2.5 2-14 Device state added
4 9 to 59 Change relay contact representation in all displays
4.3 4-8
4-9 to 4-55
Representation changed
Representation changed in all control terminal assign-
ments
4.3.6 4-24 Parameters 640 and 645 added
4-25 FOR: to V1.40 added
4.4.5 4-37 Parameter 151-ASTER changed to 151-ASTPR
ROT_4: FFTB0 changed from ISD02 to ISD03
4-38 Parameters 289, 320, 640 and 645 changed
4-39 FOR: to V1.40 added
4.5.2 4-44 Note added
4.5.4 4-47 Parameter 151-ASTER changed to 151-ASTPR
OPTN2 under BUS_1: Was duplicated, one occurrence
deleted
ISD00 and ISD01 Bus 2 and 3 changed
4.6.5 4-61 Parameter 151-ASTER changed to 151-ASTPR
Parameters 320, 640 and 645 changed
DC holding added
4-62 FOR: to V1.40 added
Field bus operation changed to Master/Slave operation
To Next Page
Loading...
