Lust CDA3000 - Field-Oriented Regulation (FOR)

Application Manual CDA3000
6-47
6 Control modes
1
2
3
4
5
6
A
DE
EN
FR
6.3 Field-Oriented
Regulation (FOR)
Please take note of the general information regarding the properties of
the motor control methods in the introduction to section 6 “Control
modes”.
Note: Field-oriented regulation is only suitable for asynchronous
motors in standalone operation (not for multi-motor opera-
tion!).
Software functions
In field-oriented speed control (FOR) not all functions of the inverter mod-
ule are required. The following functions can be selected, but they do not
activate.
Inactive functions in FOR
• Current injection
• IxR load compensation
• Slip compensation
• From firmware V. 2.10: Current-controlled startup