Lust CDA3000 - 200 A-Analog Output

Application Manual CDA3000
5-23
5 Software functions
1
2
3
4
5
6
A
DE
EN
FR
5.2.2 _200 A-Analog
output
(1) Selection of the analog actual value
(2) Output filter for fault isolation from 0 to 64 ms
(3) Scaling of the analog output
(4) Actual value
Figure 5.7 Function block for adaptation of the analog output
Configuration options, OSA00
(1) Output variable, e.g. frequency
Figure 5.8 Scaling of the analog output
Function Effect
• Definition of which scaled
actual value is delivered at
the analog output (0 ... 10V)
• Conditioning and filtering of
the analog actual value
• The analog output provides
diagnosis by way of a volt-
meter if no D
RIVEMANAGER
with digital scope is availa-
ble.
OSA00
(1)
(4)
(2) (3)
FOSA0
OAFI0
OAMX0
OAMN0
U[V]
OAMIO
OAMAO
(1)
0%
10 V