Application Manual CDA3000
1-1
DE
EN
FR
1
2
3
4
5
6
A
1Safety
1.1 Measures for
your safety
The CDA3000 inverter drives are quick and safe to handle. For your own
safety and for the safe functioning of your device, please be sure to
observe the following points:
Read the Operation Manual first!
• Follow the safety instructions!
Electric drives are dangerous:
• Electrical voltages > 230 V/460 V: Dangerously high
voltages may still be present 10 minutes after the power
is cut, so always make sure the system is no longer live!
• Rotating parts
• Hot surfaces
Your qualification:
• In order to prevent personal injury and damage to prop-
erty, only personnel with electrical engineering qualifica-
tions may work on the device.
• The qualified personnel must familiarize themselves with
the Operation Manual (refer to IEC364, DIN VDE0100).
• Knowledge of national accident prevention regulations
(e.g. VBG 4 in Germany, regulations laid down by the
employers' liability insurance associations) is essential.
During installation observe the following instructions:
• Always comply with the connection conditions and tech-
nical specifications.
• Comply with the standards for electrical installations,
such as regarding wire cross-section, grounding lead
and ground connections.
• Do not touch electronic components and contacts (elec-
trostatic discharge may destroy components).
To Next Page
Loading...
