4-62
Application Manual CDA3000
4 Application data sets
Active functions in Master/-Slave operation
More details of the software functions and setting options are presented
in section 5 “Software functions” and section 6 “Control modes”.
Function Effect VFC SFC FOR
IxR load
compensation
In case of load surges a higher torque is
available, and the motor heats up less
Current injection Increase in starting torque
Current-controlled
startup with ramp
stop
Protection against current overload shut-off
in acceleration from high load torques
to
V. 1.40
DC holding
Rotation of the motor shaft without load is
counteracted
Magnetizing Increase in coasting and standstill torque
Table4.28 Activefunctions
To Next Page
Loading...
