Application Manual CDA3000
6-7
6 Control modes
1
2
3
4
5
6
A
DE
EN
FR
Note: In the factory setting the inverter module is preset to a 1:1
ratio between the inverter output and the power output of the
asynchronous standard motor.
Settings when motor power output < inverter output
• Auto-tuning with application of one of the following functions
Note: The factory setting of the inverter module is Voltage Fre-
quency Control with 50 Hz characteristic over two interpola-
tion points. IxR load compensation and current injection are
additionally activated.
Please refer to the information given in the relevant sections
regarding the IxR load compensation and current injection
software functions.
Function Active in FS
Magnetizing
IxR load compensation
Slip compensation
DC braking
DC holding
Current injection
Current-controlled startup
Table 6.2 Generally applied functions in open-loop control mode VFC
To Next Page
Loading...
