Lust CDA3000 - Commissioning; Choice of Commissioning

Application Manual CDA3000
2-21
2 Inverter module CDA3000
1
2
3
4
5
6
A
DE
EN
FR
DE
EN
FR
5. The D
RIVEMANAGER prepares the device for the firmware transfer
and erases the program memory (Flash-EPROM). Then LED H2
lights up in addition to LED H3 and the firmware is transferred.
6. The device responds with “Software transferred successfully”.
7. A new connection is set up. Message: “Waiting for readiness” from
0...100 %. When the transfer is completed successfully, LED H2
goes out provided no ENPO signal is applied.
8. A message reminds you that you need to exit Bootstrap mode
(relates only to series MC7000).
The CDA3000 automatically cancels Bootstrap mode.