3-10
Application Manual CDA3000
3 User interface and data structure
Menu structure
The KEYPAD KP200 has a menu structure which provides for user-friendly
operation and is identical to the menu structure of the KP100 for the
S
MARTDRIVE VF1000 inverters and the MASTERCONTROL servocontrollers.
Figure 3.5 Functions of the menus
On the menu level (“MENU” display) you can use the cursor keys to
switch between menus. Press the Start/Enter key to open a menu and
the Stop/Return key to quit the menu.
Figure 3.6 Navigation at menu level
Display
• Select
• Display
Capacity indicator
Subject area
• Select
Parameter
• Select
• Change
Initial
commissioning
Drive
• Control
SMARTCARD
• Read
• Write
• Write
protection
VAL PARA
CTRL
CARD
start
enter
stop
return
VAL
PARA
CTRL
CARD
start
enter
stop
return
start
enter
stop
return
start
enter
stop
return
To Next Page
Loading...
