Lust CDA3000 - Mechanical Installation; Notes on Operation; Mounting Variants

To Next Page

To Previous Page

Application Manual CDA3000

6.1 6-7 Table changed

6.1.1 6-8 Figure 6.4 representation changed

6.1.4 6-20 Parameter X760: FS 80 changed to FS 120

Parameter X763: FS 80 changed to FS 120

6-21 Parameters 766 to 769 added

6-22 Note on current injection expanded

6.2 6-23 Notes added

6-28 Summary added

6-41 Notes added

Bullet point added

6-42 FOR: to V1.40 added

Explanatory notes expanded

6.3.1 6-45 Formula expanded

Line encoder 4096 added

6-46 Formula expanded

Line encoder 4096 added

6-47 Speed frequency 0 ...160 changed to 0 ... 1600

Appendix A-2 Parameter 153 omitted

A-5 Number 90 factory setting 1.30 changed to G

A-6 Number 92 factory setting 1.30 changed to G

Number 106 factory setting 00 changed to G

Number 127 factory setting G added

Number 394 factory setting G added

Number 397 0 changed to G

A-8 Numbers 641, 642, 643, 646, 647, 648 changed to G

A-9 Numbers 760, 761, 763, 764 factory setting changed

to G

Section Page(s) Comments/Subject

Other manuals for Lust CDA3000