4-38
Application Manual CDA3000
4 Application data sets
OED01 244-FOE01 Function selector digital output OED01 OFF WIT
OED02 245-FOE02 Function selector digital output OED02 OFF WIS
OED03 246-FOE03 Function selector digital output OED03 OFF WOTD
Reference structure
280-RSSL1 Reference selector 1 FMAX FA0 FA0 FA0 FA0
281-RSSL2 Reference selector 2 FCON FA1 FA1 FA1
289-SADD1 Offset for reference selector 1 10 0 0 7 7
MOP function
320-MPSEL Configuration for motor operated potentiometer OFF F1
Current-controlled startup
640-CLSL1 DS1: Function selector CCWFS CCWFR OFF OFF CCWFR
645-CLSL2 DS2: Function selector CCWFS CCWFR OFF OFF CCWFR
DC holding
681-HODCT Holding time 0.5 0 0 0 0
I/O Parameter Function
152-ASTER =
DRV_1
(FS)
ROT_1 ROT_2 ROT_3 ROT_4
1) After setting the parameters of the user data sets, change parameter value 166-UDSSL from PARAM (KEYPAD KP200,
D
RIVEMANAGER) to TERM (terminal operation).
Table 4.18 Automatic changes by means of the assistance parameter
An empty line means that the setting is the same as for DRV_1 (factory set-
ting).
To Next Page
Loading...
