Lynx NGT-9000 - Page 111

Lynx
®
NGT-9000
Pilot’s Guide 3-9
Controls and Indicators
• ADS-B OUT FAIL: The ADS-B out is not being transmitted by the
Lynx NGT-9000R due to the GPS position not being available
for more than 2 minutes, or possibly a failure of the Lynx NGT-
9000R.
• ADS-B OUT DEGRADED: The ADS-B out function is operating in
a degraded condition.
• ADS-B IN FAIL: The ADS-B In and ATAS functions have failed.
• ADS-B IN DEGRADED: The ADS-B In and ATAS functions are
operating in a degraded condition.
• ADS-B IN UNAVAILABLE - POSITION: The ADS-B In and ATAS
functions are unavailable due to not having a GPS position
solution of sufcient quality.
• NO ADS-B COVERAGE: No ground based transceiver has
acknowledged the presence of the Lynx NGT-9000R in the
system.
• FIS-B FAIL: The FIS-B function has failed.
• TAS FAIL: The TAS function has failed.
• TAS DEGRADED: The TAS function is operating in a degraded
condition.
• TAS OPR: TAS is operating while the aircraft is on ground.
• TAWS FAIL: The TAWS function has failed.
• TAWS UNAVAILABLE: The TAWS function is unavailable due to
not having a GPS position solution of sufcient quality.
• TAWS INHIBITED: The TAWS function is currently inhibited.
• OBSTACLES INHIBITED: The TAWS function is not alerting on
obstacles.
• IDENT: The IDENT message is being sent by the Lynx NGT-
9000R via ADS-B Out.
• XPDR FAIL: The transponder function of the Lynx NGT-9000R
has failed.
• PULL UP: This is a TAWS Warning Alert that is accompanied by
an aural announcement.
• TERRAIN: This is a TAWS Caution Alert that is accompanied by
an aural announcement.
• TRAFFIC: This is an TAS or ATAS Trafc Advisory that is
accompanied by an aural announcement.