Lynx NGT-9000 Pilot's Guide

Lynx
®
NGT-9000
Pilot’s Guide 4-1
CHAPTER 4
CONTROLS AND INDICATORS
INTRODUCTION
This chapter provides details on switches, indicators, and other
devices that could be interfaced to the panel and remote mounted
Lynx NGT-9000.
COCKPIT SWITCHES
Cockpit switches are optional and may not be a part of the aircraft
installation.
IDENT
This switch activates SPI and transmits an ident pulse. An ident pulse
highlights the aircraft’s symbol on the ATC’s radar screen and is
identied on the panel mount Lynx NGT-9000 screen when active.
Audio Acknowledge
Release 2.0 or greater. This button cancels the current aural alert.
Standby Mode
Release 2.1 or greater. This switch will place the NGT-9000
Transponder into Standby. The mode will be indicated on the display
and will cause the lower three buttons (Mode, Squawk, and IDENT)
to be removed. The squawk code can edit screen is still available by
tapping the squawk code text.

Lynx NGT-9000 Specifications

General

Brand	Lynx
Model	NGT-9000
Category	Security System
Language	English