Lynx
®
NGT-9000
Pilot’s Guide2-58
Operation - Panel Mount
Display Range Indicator
This indication is a readout of the selected display range and is located
in the lower right corner of the display.
Display Orientation Indicator
The display orientation indicator is located on the lower left side of the
screen and is shown as either, No indication (default installed direction
source of heading or track), a white/green chevron indicating North-
Up orientation, or has the letters “TRK” indicating the installed heading
source has failed and the GPS track is now being used.
The display orientation indicator is not shown during normal operation.
Installations with heading will have a default display orientation of
heading up. Installations without heading will have a default display
orientation of track up.
When installations without heading are on the ground with no valid
track information, the screen reverts to north up depiction and indicates
the north chevron.
When installations with heading source have a heading failure, if track
is valid, the screen will revert to track up and indicate “TRK”. If track is
invalid (sitting on ground), then the screen will be north up.
Aural Acknowledge Button
This button is shown on the right side of the screen when a terrain
caution or warning alert occurs. Tap the button to silence the aural part
of the current terrain alert. The button is then removed from the screen
until another alert occurs.
AGL Altitude Readout
The Above Ground Level Altitude readout is located in the top right of
the screen. The readout has a upper limit of 9,950ft. The readout is
removed from the screen if the altitude is > 10,000ft or when sitting on
the ground (0 ft AGL).
To Next Page
Loading...
Need help?
General
