Lynx NGT-9000 - Section 1 General Information

Lynx
®
NGT-9000
Pilot’s Guide 1-3
Description
Figure 1-2: Example of Remote Mount Lynx NGT-9000
ADS-B System
The ADS-B system used by the Lynx NGT-9000 has the following
capabilities:
• 1090 In - Receives ADS-B, ADS-R and TIS-B
• 1090ES Out - Transmit ADS-B
• UAT In - Receives ADS-B, ADS-R, TIS-B, FIS-B
The Automatic Dependent Surveillance-Broadcast (ADS-B) improves
situational awareness and ight safety by providing real time trafc
information.
The ADS-B In function is used to receive ground station supported
TIS-B and ADS-R trafc, and direct communication with ADS-B out
equipped aircraft.
The ADS-B Out (1090MHz) function is used to periodically broadcast
(without interrogation) information about the aircraft that includes
aircraft identication, position, altitude, velocity and other aircraft
status information.
Transponder Diversity Options
The Diversity option requires a specic model of the Lynx NGT-
9000. This feature offers enhanced transponder operation and trafc
awareness via 1090MHz using the ADS-B service. This option requires
the installation of an additional top mounted UAT (L-Band) antenna.
Transponder
The transponder function of the Lynx NGT-9000 replies to Mode A,
Mode C and Mode S interrogations on 1030 MHz and transmitting
responses at 1090 MHz. Transponder operation is performed on the
left application screen.