Lynx NGT-9000 - Ownship Symbol; Zoom Buttons; 360 View; Figure 2-42: Lightning Screen 120 View

Lynx
®
NGT-9000
Pilot’s Guide 2-75
Operation - Panel Mount
Figure 2-42: Lightning Screen 120 View
Ownship Symbol
The ownship symbol is a white triangle with the nose of the ownship
symbol corresponding to the ownship position.
• When the View mode is 360 the symbol is centered on the screen.
See Figure 2-41.
• When the View mode is 120 the symbol is centered at the bottom
of the screen. See Figure 2-42.
Zoom Buttons
Zoom In (+) and Zoom Out (-) buttons are located on the bottom of
screen. The buttons are used to change the display range shown on
the screen. Display range options for the Lightning screen is 25, 50,
100, and 200 nmi.
360 View
Display range 25 NM has a white outer circle with Azimuth indicators
at 30 degree intervals. See Figure 2-41.
Display range 50, 100, and 200 has Azimuth indicators at 30 degree
intervals in an outer ring. An inner white circle surrounds the Ownship
that represents 25 nmi from the Ownship.
120 View
Display range 25 NM has a white outer arc with Azimuth indicators at
+ / - 30 degree with white radial lines extending from the nose of the
ownship symbol. See Figure 2-42.
Display range 50, 100, and 200 has Azimuth indicators at +/- 30 and
+/- 60 degrees with white radial lines extending from the nose of the
ownship symbol. An inner white arc extends from the +/- 60 radial
lines that represents 25 nmi from the Ownship.