Lynx NGT-9000 - Traffic Screen; Figure 2-8: Traffic Applications Screen

Lynx
®
NGT-9000
Pilot’s Guide2-14
Operation - Panel Mount
Traffic Screen
The trafc screen has a black background. Transponder Mode can be
set to Standby (SBY), On (ON), or Altitude (ALT).
The Trafc application is available on both the left and right screen.
The Trafc information is shown if ADS-B or TAS data is valid.
A “Trafc Failed” is displayed if both ADS-B and TAS (optional) are
failed. “Trafc Unavailable” is displayed if ADS-B In has no heading
or track available and TAS (if installed) is in standby. See Figure 2-8
for an example of Trafc Screens. Refer to the Functional Description
below for detailed information.
If TAS or ATAS options are congured and the trafc screen is not
being displayed on either the left or right screen and a trafc advisory
occurs, the trafc screen automatically opens on the right screen if
there is no TAWS Alert (option) active and will open on the left screen
if a TAWS alert is active.
Figure 2-8: Traffic Applications Screen
6
ALT
NRM
-01
-08
00
00
N333TL
150 kts
On
XPDR
i
MSG
1200
+
In
-
Out
6
ALT
NRM
-01
-08
00
00
i
N333TL
150 kts
-
Out
TAS
STBY
TAS
STBY
Zoom In
Range
Indication
Selected
Traffic Info Button
Options
Button
Transponder
Banner
Selected
Traffic GS
Zoom Out
Directional Ownship
Altitude
Mode
Circle indicates symbol is selected
Acknowledge Button
Selected
Traffic ID
Traffic Mode Indicator
+
In
Transponder Mode
TIS-B No Coverage Indicator
TIS-B No Coverage Indicator